MS3810 Insertion Magnetic meter
Isoil’s MS3810 Insertion Mag meter
The MS3810 insertion sensor ISOMAG is used for mounting on pressure lines with diameters from 80 to 8000 mm and it is ideal for temporary measurement campaigns, line monitoring and leak detection.
Wide choice of sensor lengths for installation in pipes of different diameters with the possibility of integrating pressure measurement.
All ISOMAG® meters are subject to wet calibration on ISO17025 certified benches before leaving our factory. The original accuracy is granted over the life time of the meter when is working within its specifications. Thanks to the Accredited Calibration Laboratory LIBRA, conforming to UNI EN ISO/IEC17025 (ACCREDIA Certificate LAT237), ISOIL Industria can also offer a calibration service for liquid flowmeters in volume, flow and mass.
The operating principle of magnetic flowmeter is based upon Faraday’s Law of electromagnetic induction, stating that a “voltage will be induced in a conductor moving
through a magnetic field”.
Full bores and insertion electromagnetic flowmeters need 2 fundamental conditions to operate accurately:
- Medium must be conductive.
- Pipe must always be full
The Isoil MS3810 Insertion Mag meter costs less than the full bore model and can be installed while the pipe is under pressure with no interruption to the flow.
The electromagnetic MS3810 Insertion Mag, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have been ISOIL Industria‘s passion and continuous research since 1958.
Features of MS3810 Insertion Mag meter
- Nominal pressure: PN 25
- Process connections: Threaded 1”
- Ball valve for extraction under load
- Liquid temperature: from 0 to 100 ° C
- Coating material: PEEK
Electrode material: AISI316L - Sensor material: 316 Stainless Steel
- Accuracy: ± 2% of the value read
(regardless of the coupled converter) - Repeatability: ± 0.2%
- Flexible mounting to view the display on the other.
- Housing material: Nylon loaded with 15% fiberglass or Aluminum.
